SWITCH Lantai 1 VTP (Client)

SWITCH Lantai 1 VTP (Client)

 

       Switch>enable 

       Switch#conf t 

       Enter configuration commands, one per line.  End with CNTL/Z. 

       Switch(config)#hostname IDN-Lantai1 

       IDN-Lantai1(config)#int fa0/1 

       IDN-Lantai1(config-if)#sw mode trunk 

       IDN-Lantai1(config-if)#int fa0/4 

       IDN-Lantai1(config-if)#sw mode trunk 

       IDN-Lantai1(config-if)# 

       %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/4, changed state

        to down 

        %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/4, changed state

        to up

 

Membuat VTP Client

IDN-Lantai1(config)#vtp mo client

Setting device to VTP CLIENT mode.

IDN-Lantai1(config)#vtp domain idn.id

Domain name already set to idn.id.

IDN-Lantai1(config)#vtp pass idn123

Setting device VLAN database password to idn123